ATF Kimya was established in 2001 with the aim of serving the Metal Surface Treatment Chemicals sector before electrostatic Powder Coating.
Our company, whose main goal is unconditional customer satisfaction, has worked in this sector for many years, has a high level of knowledge, serves its customers with a staff that cares about after-sales service and the correct information flow.
It also sells raw materials used in many sectors.
Our company, which has ISO 9001-2008 quality certificate, is constantly developing new product projects by closely following the developments in the world in metal surface treatment chemicals.
With its dynamic and investigative structure, it aims to be a permanent and reliable company in its sector.
Our products are mainly used in automotive, white goods, aluminum sectors and all kinds of metal Processing Industries. In all areas where electrostatic powder coating and wet paint are used, Surface Treatment Chemicals should be applied to make the paint adhesion and corrosion resistant.
Because the parts used in the automotive sector are more affected by the external environment (air, salt, impact), the Zinc Phosphate process, which is more resistant to corrosion, is preferred.
The use of Tri cation Zinc Phosphate will further improve the quality. In this type of process line, parts must be treated in degreasing, rust-delaying and activation baths before entering phosphate baths. After phosphating, it is also terminated by passivation and drying.All of this process can be done in spray or immersion baths. Because of its long-term oil retention, manganese phosphate can also be used in threaded parts.
Materials used indoors are less affected by corrosion. Lighting fixtures, table, chair, radiator etc. such products are included in this group. The surface treatment to be applied here is the iron phosphate process. If Zinc Phosphate is applied, the quality will rise to the highest level, but iron phosphate, which is more convenient in terms of cost and ease of use, can be preferred. Iron phosphate can be used in combination with degreasing effects when applied as a spray, as it is applied as a dip. In other words, both degreasing and iron phosphate are made with the same bath. Zinc Phosphate coating has twice the resistance to corrosion compared to iron phosphate coating.
Anodizing or powder coating can be applied on aluminum and aluminum alloys parts. Degreasing should be done in both processes. Aluminum, which is degreased by Alkaline degreasing or acidic degreasing, must be chromated after etching if the paint is to be made.
Aluminum chromate allows better adhesion of paint, reduces its brittleness, increases its ability to stretch. The paint does not leave the surface easily when it is hit from the outside.
It is used in two different ways as yellow chromate and Yesil chromate. Green chromate can be preferred because it is more compatible with the environment Yesil. Yellow chromate coating on aluminum, creating a homogeneous color that reaches from light yellow to golden yellow.
Paint remover, rust remover, corrosion inhibitor, activation, inhibitor and degreasing additive such as products to be used in the relationship between metal and paint are different materials. Paint remover can be applied in different shapes for aluminum components or hair parts. Rust remover or tufal remover can also cause different product use for each material. For this reason, surface treatment chemicals should be used taking into account the unique conditions of each metal part and ready for the next process. Activation, which is a special product, reduces phosphate crystals before Zinc Phosphate, making the coating more homogeneous.
